Vectric Aspire Tutorial May 2026

First pass: roughing. The compression bit hogged away most of the waste, leaving a stepped landscape.

Third pass: V-carve text. The 60° bit angled into the wood, varying width by depth, creating elegant serifs. Vectric Aspire Tutorial

Using the Two-Rail Sweep , she drew two curved guide rails and a cross-section profile of a bevel. Aspire generated a smooth, 3D finial shape between them. She watched, amazed, as flat circles became domed points, and straight lines turned into elegant chamfers. First pass: roughing

Maya traced a compass rose from a reference image, zooming in to weld intersecting circles into a single, flawless shape. For the first time, she understood: garbage vectors in, garbage carving out. The tutorial then introduced the feature that separates Aspire from lesser software: true 3D modeling . She wanted the compass points to have raised, beveled edges—not just flat letters, but sculpted forms. The 60° bit angled into the wood, varying

She learned to nest parts efficiently on her slab, using Aspire’s tool to rotate and pack components, saving material. Then she added tabs—small uncut bridges—to keep the piece from flying loose during the final cutout. 5. The First Carve At 8 p.m., with safety glasses on and dust collector running, Maya clicked Save Toolpath and transferred the G-code to the CNC. The machine homed, whirred, and began.

“This is what I was missing,” she whispered. “The Z-axis.” The project called for a brass powder inlay in the center. Leo had shown her traditional inlay with a chisel—painstaking, one-mistake-and-you’re-done work. Aspire did it virtually first.